PDF Product Manual (2.5MB)

Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.

Product Manual (2.5MB)

Print or Save

Enerdrive ePOWER Sine Wave Inverters Technical and Customer Service Manual

Introduction

Thank you for choosing the Enerdrive ePOWER Inverter, designed to provide reliable AC and 5V USB power for various applications. This manual is intended to guide customer service and technical staff in assisting users with product operation, troubleshooting, and specifications.

Important Safety Information

Fire and Chemical Burn Hazard: Ensure air vent openings are not covered or obstructed. Install the unit in a well-ventilated area.
Electrical Safety: Always have someone nearby when working with electrical equipment or lead-acid batteries. Wear eye protection and gloves. Keep fresh water and soap nearby in case of battery acid contact.
Explosion Hazard: Do not use near flammable fumes or gases. Avoid covering ventilation openings.

Product Description

Models: EN1110s (1000W) and EN1120s (2000W), both providing 230VAC power.
Package Includes: ePOWER Inverter base unit and Owner's Manual.

Installation

Location: Install indoors away from direct sunlight, heat, moisture, or contaminants. Allow at least 75mm of space around the unit for ventilation.
Wiring and Safety: Installation should comply with electrical safety regulations. A certified technician or electrician is recommended for installation.
DC Input and Grounding: Use low resistance wire for DC connections. Ground the unit through the ground stud near the DC Input terminal.

Installation Steps

Mounting: Choose a suitable location. For RVs, mount the unit horizontally. Use the provided template for drilling mounting holes.
DC Input Connection: Ensure correct polarity when connecting DC input cables. Use a Disconnect Switch and appropriate fuse or circuit breaker based on the model.
Remote Switch Connection (optional): Connect the Remote Switch to the RJ11 Remote Port for remote operation.

Unit Operation

Turning On/Off: Use the "Power/Select" button to turn the unit or USB power on and off. A single beep indicates USB power on, and two beeps indicate both AC and USB power on.
Display and Status LED: The display shows battery voltage, output power, and error codes. The Status LED indicates the unit's operational status (green for normal, amber for warning, red for error).

Troubleshooting

Refer to the "Understanding the Error Code" section for specific error codes and corrective actions. Common issues include no output voltage, no AC output, and error conditions indicated by the Status LED.

Specifications

AC Output Power: 1000W for EN1110s, 2000W for EN1120s.
AC Surge Power: 2000W for EN1110s, 4000W for EN1120s.
Nominal DC Input Voltage: 12.5 VDC for both models.
Operating Temperature: 0°C to 40°C.
Dimensions and Weight: Varies by model.

Warranty

Coverage: Two-year limited warranty covering defects in materials and workmanship.
Limitations: Does not cover damage from misuse, incorrect installation, or commercial use.

Return/Repair Policy

Contact customer service for assistance before returning the product. Defective units can be returned within 30 days of purchase for replacement or repair.

This manual is intended to provide comprehensive information for customer service and technical staff. For further assistance, refer to the specific sections on safety, installation, operation, troubleshooting, specifications, and warranty information.