PDF Spec Sheet (1.3mb)
Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.
PRV85 Water Tank Technical and Customer Service Guide
Product Overview
- Part Number: PRV85
- Type: Under Body Water Tank
- Material: Roto Moulded Polyethylene, Food Grade
- Optional Accessory: Pump
- Fittings: 3/4” Brass Fittings & 3/8” Plastic Thread Breather
- Capacity: Approximate Usable Storage - 76 Litres
- Dimensions: Length: 810mm, Width: 615mm, Height: 240mm
Installation Instructions
- Mounting Location: Identify a sturdy surface on your vehicle for mounting, such as chassis rails.
- Drilling: Align the mounting flanges of the tank with the chosen surface, mark the hole locations, and drill accordingly.
- Fastening: Secure the tank using bolts and flat washers.
Filling Instructions
- Pressure Filling Warning: Do not pressure fill the tank from a hose connected from mains pressure if the flow rate exceeds that of the breather. This can cause the tank to inflate and split, voiding the warranty.
- Recommended Fittings: Use plastic/nylon fittings instead of brass to avoid potential damage to the tank.
Pre-Use Preparation
- Flushing Requirement: The tank must be flushed before its initial use to ensure cleanliness and safety for water storage.
Capacity Note
The stated litre capacity is based on cubic measurements and serves as a guide. The actual usable litre capacity may vary depending on how the tank is mounted.
Troubleshooting and Tips
- Leakage or Splitting: Ensure not to exceed the breather's flow rate when filling to prevent tank damage. If leakage occurs, check the fittings and ensure they are properly sealed.
- Mounting Stability: If the tank shows signs of instability or movement, recheck the mounting bolts and fasteners for tightness.
- Cleaning: Regularly flush and clean the tank to maintain water quality, especially if the water remains in the tank for extended periods.
Product Features
- Durability: Made from food-grade roto moulded polyethylene, ensuring a durable and safe water storage solution.
- Ease of Installation: Designed for underbody mounting, complete with straightforward drilling and fastening instructions.
- Versatility: Optional pump accessory available for enhanced water access and usability.
This guide is intended to provide comprehensive information for customer service and technical staff regarding the PRV85 water tank. For any further assistance or detailed inquiries, refer to the product's specific sections as outlined above.