76litre, poly tank with pump, 810 x 610 x 240mm Heavy Duty, roto moulded Polyethylene water tank.
- This is UV stabilised, food grade polyethylene with an average wall thickness of 6mm. The inbuilt strength means that mounting
brackets and protective sheeting is not required. These feature built-in mounting holes along each side and also include baffles to
reduce water surge during travel.
The tanks include 3 x 3/4 inch Brass BSP female thread for inlet/outlet. All openings come with
blank plugs, threaded fittings are sold separately.
These have a 40mm raised top to provide more storage than the 70 litre model,
that may fit between chassis rails, there is a 3/8 Inch BSP female threaded breather on the raised section, at the end, no cap provided
for this, as it must have some breather installed, to allow tank to completely fill.
This tank comes with an installed 12V Powerflo 3.8 litres/min pump, 40psi with a weighted strainer pickup and automatic pressure
switch that turns the pump on when the tap is turned on. Pump outlet is a 3/8 Inch (10mm) hose barb.
A separate model is
available without the pump and strainer installed.
- This quality product is Made in Australia.
- 1 year warranty.
- Model: PRV85-P
- Brand: Enmach
- Size is 810mm x 610mm x 240mm*( Size may vary +/- 3% due to manufacturing process).
- Shipping Weight: 11.00 Kgs.
- Shipping Dimensions: 61 cm x 81 cm x 24 cm.
This product connects to other products that we sell. It has the following connections:
Click to Show Connecting Products