Enerdrive ePOWER 400W True Sine Wave Inverter

Description

Power for your portable devices can be a challenge for many; but with an ePOWER 400W True Sine Wave inverter installed you can power all your small portable electronics with ease. It's best practice for laptops, digital camera chargers, portable electronic devices etc, to be run from a True Sine Wave inverter if used for long extended periods; and 400watts of power is the perfect amount required. For a quick charge, simply plug your devices into the onboard USB outlet to charge direct from the inverter without the need for AC leads and adaptors. The ePOWER inverter comes ready with battery cable and clips and can easily be installed or stored for portable use in your boat, caravan or 4wd for those need it now moments.

Features

• Australian GPO Outlet
• True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
• Audio & Visual alarm with warning/error codes to alert user to check inverter condition before unit shutdown
• Automatic shutdown protects overload, over temperature and low/high battery conditions
• High surge capacity for products that require more power to start (2 x constant)
• High efficiency conversion of battery available power to AC power
• Mounting brackets for permanent installation
• Heavy duty DC battery stud connectors
• Ignition Start terminal for turning the unit On and OFF using a +12V signal
• DC battery cable with HD aligator clips & 12v Cig Socket cable supplied
• 1 year warranty.

Specifications

• Model: EN1104S-12V
• Brand: Enerdrive
• Barcode: 9342616000236
• AC Output Power: 400W
• AC Output Current: 1.74A
• AC Surge Power (Peak): 800W
• AC Output Voltage: 230 Vac / 50 Hz
• AC Output Waveform: True Sinewave
• AC Output Socket: 1 outlet
• Nominal DC Input Voltage: 12.5 VDC
• No Load battery draw: < 0.8 ADC
• DC Input Voltage operating range: 10.5 - 15.9 VDC
• Under Voltage Alarm: 11.0 VDC
• Under Voltage Shutdown: 10.5 VDC
• Under Voltage Recovery: 12.0 VDC
• Over Voltage Shutdown: 15.9 VDC
• Operating Temperature: 0C to 40C
• Storage Temperature: -20C to 60C
• Relative Humidity: 5-90% noncondensing
• Weight: 1.1Kg
• Dimensions (WxLxH): 152 x 218 x 66mm

Further Information

• View a summary of the related PDF: Product Manual (1.6MB)

Our Comments

As outlined by Enerdrive a DC rated fuse or DC rated circuit breaker must be connected along the DC positive line. The recommended Fuse Protection, Cable length and Size for the Enerdrive 400W inverters are as follows:

Cable Size: Minimum 16mm2

Cable Length: 1.5m or under

Fuse: 60A/16V minimum rating (Based on the size of the battery bank chosen)

Question about this product?