Enerdrive ePOWER 2000W True Sine Wave Inverter

Description

With ePOWER's state of the art, easy to use design, this 2000W inverter will offer you reliable service for providing AC power and 5V USB power for your home, boat, caravan, 4WD or commercial vehicle.

The Enerdrive ePOWER 2000W Inverter can run many AC powered appliances when you need AC power anywhere. The 5V USB power can charge many USB powered devices.
True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life.

Features

• Australian GPO Outlets
• Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown
• Automatic shutdown protects overload, over temperature and low/high battery conditions
• High surge capacity for products that require more power to start (2 x constant)
• High efficiency conversion of battery available power to AC power
• Mounting brackets for permanent installation
• Heavy duty DC battery stud connectors
• Includes 5V USB port
• 6 Meter Remote On / Off Switch Included with both 1000W and 2000W Inverter Models
• 5 year warranty.

Specifications

• Model: EN1120S
• Brand: Enerdrive
• Barcode: 9342616000182
• Wattage: 2000W
• Peak Power: 4000W
• Output Voltage and Frequency: 230 Vac / 50 Hz
• Socket Type: 2 x AC outlets
• Input Voltage: 12.5 VDC
• Operating Temperature Range: 0C to 40C
• Humidity: 5-90% noncondensing
• AC Output: 2000W, 8.7A
• Output wave form: True Sinewave
• No Load Battery Draw: < 1.2 ADC
• Under Voltage Alarm: 11.2 VDC
• Operating Altitude: Up to 3000 meters above sea level
• Product Dimensions(LxWxH): 416 x 230 x 110mm
• Net Weight: 5.5 Kg
• Shipping Weight: 6.13 Kgs.
• Shipping Dimensions: 17 cm x 49 cm x 29 cm.

Further Information

• View a summary of the related PDF: Product Manual (2.5MB)

Our Comments

As outlined by Enerdrive a DC rated fuse or DC rated circuit breaker must be connected along the DC positive line. The recommended Fuse Protection, Cable length and Size for the Enerdrive 2000W inverters are as follows:

Cable Size: 70mm2

Cable Length: 1.5m or under

Fuse: 250A

The 250Adc over-current protective device needs to be installed within 17.8cm from the battery positive terminals. A Disconnect Switch with the same or higher rating is also recommended.

Enerdrive now offer a Battery Cable Kit for the 2000W ePOWER Inverter consisting of 1.5m of 70mm2 DC cable, 250A Mega Fuse & Holder (see related items below)

Question about this product?