Enerdrive Bundle - 200Ah B-TEC + 40A DC2DC Charger

Description

This neat little bundle that combines the Enerdrive 40A DC to DC Charger and 200Ah B-Tec Lithium Battery.

Enerdrive Bundles are a great way to save money on premium products. From simple to spectacular there is a bundle for every setup, and the bigger the bundle the bigger the savings.

Features

• This bundle includes the following Enerdrive premium products:

  Enerdrive B-TEC 200Ah G2 Lithium Battery

  Lithium Batteries are nearly 50% lighter than traditional Lead Acid Batteries and provide around 60% more usable power, the Enerdrive B-TEC 200Ah Lithium G2 Battery = 320Ah AGM. They are capable of much higher rate of Discharge (required for inverters) & Charge (quick recharge time) making them the ideal choice for Caravan, RV and 4x4 installations. Not only are Lithium Batteries smaller, lighter & more powerful but they last longer, in short while they may cost more upfront the long term savings are tremendous.

  The Enerdrive B-TEC Lithium Batteries have an inbuilt Battery Management System(BMS) with Bluetooth Connection thus the B-TEC Name. What this means is each battery will monitor and optimise each prismatic cell during normal operation. It also protects the battery from over charge, over discharge, over temperature & short circuit to ensure longevity and safe performance. The batteries key performance indicators are monitored and transmitted wirelessly to your smartphone or tablet. This information is presented in a clean concise format making it quick and easy to review your systems performance. The BMS will monitor the following metrics:

• Battery Capacity
• Battery Voltage
• Battery Current (Amps)
• Battery State of Charge (SOC)
• Battery State of Health (SOH)
• Battery Status
• Individual Cell Voltage
• Battery Temperature
• Battery Cycles
• Battery Alarms
• Battery Event Information

  Enerdrive ePOWER DC to DC Battery Charger w Solar Input - 12V / 40A

  The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. DC charger features include:

• Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
• DC M6 screw terminals that will allow for large battery cable connection between all sources
• A dedicated Maximum Power Point (MPPT) solar regulator
• The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
• 40A output up to 40+ degrees C with thermo controlled fan cooling
• Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
• Temperature sensor included in charger for more accurate battery charging

• 5 year warranty.

Specifications

• Model: K-200-10
• Brand: Enerdrive

Bundle Includes:

Enerdrive B-TEC 200Ah G2 Lithium Battery #EPL-200BT-12V-G2

• Nominal Voltage: 12.8V
• Nominal Capacity: 200Ah
• Dimensions (LxWxH): 505 x 172.5 x 265mm
• Net Weight: (kg) 25.0 Kg
• Cycle Life (DOD - 80% under controlled conditions): More Than 2000 Cycles
• Maximum Charge Current: 150A @ 25C for 30mins
• Recommended Charge Current for Maximum Life: 40 - 100A
• Maximum Discharge Current: 200A @ 25C +/- 5C for 30mins

  Enerdrive ePOWER 12V 40A DC to DC Battery Charger #EN3DC40+

• Output Rating: 40Amps
• Output Voltage: 12V Nominal (8.0V min)
• Output Current: 5A ~ 50A
• Output Power: 775W
• Alternator Input Votage: 0.5 - 16VDC / 21 - 32VDC
• Solar Input (Max): < 23V input, 500W (600W allowable) >37.5V-45V input, 750W (800W allowable)
• Dimensions (HxWxD): 242mm x 172mm x 74mm
• Unit Weight: 1.85 Kg

Further Information

• View a summary of the related PDF: Product Manual (2.1MB)

Video Guide