Enerdrive Bundle - 125Ah B-TEC + 40A DC & AC Chargers + ePRO+
$3,656.00
$3,110
Direct from supplier, Ships in 5 days.
Postage & ETA
Enter your postcode for delivery cost.
×
Postage Price - Combine & Save
It is cheaper to order multiple items at the same time than to place separate orders.
You can see the postage price by adding products to your cart and entering your postcode.
The minimum postage price is $11.40 and includes orders up to 1/2 a Kilogram posted anywhere in Australia.
For larger orders the postage price is calculated from the total shipping weight of the all the parts plus a flag-fall cost. Prices vary based on the delivery postcode.
Description
This great bundle combines the Enerdrive 40A DC to DC Charger, 40A AC Charger, ePRO PLUS Battery Monitor and 125Ah B-Tec Lithium Battery.
Enerdrive Bundles are a great way to save money on premium products. From simple to spectacular there is a bundle for every setup, and the bigger the bundle the bigger the savings.
Features
This bundle includes the following Enerdrive premium products:
Enerdrive B-TEC 125Ah G2 Lithium Battery
Lithium Batteries are nearly 50% lighter than traditional Lead Acid Batteries and provide around 60% more usable power, the Enerdrive B-TEC 125Ah Lithium G2 Battery = 200Ah AGM. They are capable of much higher rate of Discharge (required for inverters) & Charge (quick recharge time) making them the ideal choice for Caravan, RV and 4x4 installations. Not only are Lithium Batteries smaller, lighter & more powerful but they last longer, in short while they may cost more upfront the long term savings are tremendous.
The Enerdrive B-TEC Lithium Batteries have an inbuilt Battery Management System(BMS) with Bluetooth Connection thus the B-TEC Name. What this means is each battery will monitor and optimise each prismatic cell during normal operation. It also protects the battery from over charge, over discharge, over temperature & short circuit to ensure longevity and safe performance. The batteries key performance indicators are monitored and transmitted wirelessly to your smartphone or tablet. This information is presented in a clean concise format making it quick and easy to review your systems performance. The BMS will monitor the following metrics:
Battery Capacity
Battery Voltage
Battery Current (Amps)
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information
Enerdrive ePOWER DC to DC Battery Charger w Solar Input - 12V / 40A
The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. DC charger features include:
Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
DC M6 screw terminals that will allow for large battery cable connection between all sources
A dedicated Maximum Power Point (MPPT) solar regulator
The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
40A output up to 40+ degrees C with thermo controlled fan cooling
Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
Temperature sensor included in charger for more accurate battery charging
Enerdrive ePOWER 12V / 40Amp AC Battery Charger
The Enerdrive ePOWER 40A Battery Charger is a fully automatic, "set and forget" charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.
The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met. AC charger features include:
Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
LED Display: Easy to use "set and select" menu along with scrolling charger status.
Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
Temperature Sensor: Battery temperature sensor included with 3 meter cable.
Enerdrive ePRO PLUS Battery Monitor
The ePRO Plus is the latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control and display unit. The shunt has a Grid Optimized footprint for perfect integration with our DC Modular products.
This advanced battery monitor not only shows the true state of charge of your battery system. It also offers a large amount of additional features to optimally supervise your battery system and control external equipment. The ePRO Plus is compatible with lead based and Lithium batteries (LiFePO4).
The new ePRO Plus is equipped with an active shunt module. All measurements and calculations are made inside the active shunt module, resulting in the highest accuracy. The end results are transferred to the Control and Display Unit (CDU) over a digital cable connection, ensuring the highest immunity against external interference even in harsh industrial applications.
The ePRO Plus can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input or backlight control. The ePRO Plus battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc. So any lead - or lithium based battery from 12V up to 48V can be monitored. ePRO Plus Battery Monitor features include:
Complete battery status information at a glance (%, V, A, Ah, W, h:m, C)
Supports up to three battery banks (12V, 24V and 48V)
Very simple 'Plug and Play' installation
Perfect integration with Enerdrive DC Modular products