Reversing Camera System - Technical and Customer Service Guide

Monitor Specifications

• Screen Ratio: 16:9
• Resolution: 800(W)xRGBx480(H)
• Power Supply: 12VDC
• Signal Input: Two-way video input, V1/V2 switchover
• No Signal Display: Blue screen
• Rearview Function: Picture can be adjusted for Left and Right mode
• Control: Operated via Keystroke and remote control
• OSD Language Options: English, Portuguese, Spanish, Deutsch, French, Italian, Russian, Chinese
• Dimensions: Length 385mm x Width 148mm x Thickness 23mm

Camera Specifications

• Infrared LEDs: Yes
• IP Rating: IP 68 (Waterproof)
• Image Sensor: SONY CCD
• Effective Pixels: 728*582/728*512
• TV Lines: 520
• Lens Angle: 120 degrees
• Power Supply: 12VDC
• Operating Temperature: -20 degrees C to +75 degrees C

Installation Instructions

Items Supplied

1. 7-inch Rear View Mirror Mount Monitor
2. Infrared LED Camera
3. 6M/20M Extension Cables
4. 3 Meter Spring Cable
5. Heavy Duty 4 Pin Connectors

Single Camera Installation

1. Red Wire (Power Wire): Connect to the vehicle's reversing lights. This connection powers the system when the reversing lights are on, automatically displaying the camera image on the monitor.
2. Black Wire (Ground): Connect to the vehicle's ground.

Dual Camera Installation

1. Red Wire (Power Wire): Connect to the vehicle's ignition. This powers the system when the ignition is on, displaying Camera 1's image on the monitor.
2. Black Wire (Ground): Connect to the vehicle's ground.
3. Green Wire (Video 2 Trigger Wire): Connect to the vehicle's reversing lights. This energizes Camera 2, automatically switching the display to Camera 2's image when reversing.

Wiring Instructions Summary

• Single Camera Setup: Red wire to reversing lights, Black wire to ground.
• Dual Camera Setup: Red wire to ignition, Black wire to ground, Green wire to reversing lights for Camera 2 activation.

Troubleshooting Tips

• No Display/Blue Screen: Ensure all connections are secure. Check if the monitor is receiving power and if the camera is properly connected.
• Image Not Switching for Dual Camera Setup: Verify the green wire is correctly connected to the reversing lights and functioning.
• Poor Image Quality: Check for any damage to the cables or connectors. Ensure the camera lens is clean and unobstructed.

Operating Instructions

• Switching Between Cameras: Use the V1/V2 switch on the monitor or the remote control to toggle between camera views.
• Adjusting the Display: Use the OSD menu to adjust brightness, contrast, and other display settings. Language selection is also available through the OSD menu.

Installation Recommendations

Installation should be performed by a qualified Auto Electrician to ensure safety and proper operation.
Ensure all connections are secure and protected from the elements to prevent damage and ensure longevity of the system.

This guide serves as a comprehensive reference for customer service and technical staff to assist with product inquiries, troubleshooting, and detailed information regarding the reversing camera system.