PDF Product Manual Fiamma F45 S 350 Awning - Polar White Case - Royal Grey
# Fiamma Awning Installation and Usage Guide for Customer Service and Technical Staff
## Installation Instructions
### Pre-Installation Checks
- **Goods Receipt Inspection**: Upon receiving the awning, inspect for any damage or deformities caused during transport. In case of any issues, contact the dealer.
### Installation Process
1. **Qualification**: Installation must be performed by qualified personnel.
2. **Location Selection**: Identify vehicle wall reinforced points for awning attachment.
3. **Bracket Selection**: Choose brackets based on the vehicle's roof profile.
4. **Marking and Drilling**:
- Mark the fastening points on the vehicle's exterior wall.
- Ensure the awning cassette is mounted horizontally.
- Before drilling, confirm no internal obstacles (e.g., cables, pipes).
5. **Bracket Installation**:
- Do not overtighten the bracket lock nuts.
- Align brackets perfectly to the vehicle wall.
- Use spacers if the vehicle wall is not straight to ensure proper alignment.
6. **Awning Placement**:
- Place the awning on the brackets and secure as illustrated.
### Special Considerations
- **For Awnings 400cm and Longer**: Use all 3 provided brackets for secure installation.
- **Bracket Holes**: Brackets come with two holes; use the most convenient one for installation.
## Maintenance Instructions
- **Regular Checks**: Periodically inspect the brackets to ensure they are securely attached, especially after the first few miles of travel.
## Instructions for Use
### Deploying the Awning
1. **Leg Extraction**: After extending the awning about 1m, place the support legs on the ground.
2. **Adjusting Support Legs**:
- Adjust the legs' height as needed.
- Secure the legs to the ground with hooks to prevent wind lift.
- Optionally, use storm cords or the Fiamma Tie-Down Kit for additional security.
3. **Wall Brackets**: Support legs can be attached to wall brackets installed at reinforced points on the vehicle.
4. **Weather Precautions**: The awning is designed as a sunshade; retract it during strong wind, heavy rain, or snow. If necessary, lower one side for water drainage and use the tension rafter (included with some models).
### Closing the Awning
- Ensure the awning rolls up correctly; the red indicators should not be visible when the awning is fully retracted. Check for any fabric damage as it may hinder proper retraction.
### Accessories Installation
- **Tension Rafter**: For models 400-450, the tension rafter is standard. For models 250-350, it's optional.
- **Rafter Pro**: Recommended for temporary use only.
### Safety Tips
- **Positioning of Support Foot**: Ensure correct positioning to prevent incorrect closure.
- **Awning Tension Accessories**: Install as per guidelines for optimal tension.
## Additional Tips
- **Cleaning**: Use mild detergent for cleaning the awning fabric.
- **Troubleshooting**: In case of issues, refer to the dealer or contact support.
### Important Reminders
- The awning is primarily a sunshade; it's not designed to withstand adverse weather conditions like heavy rain, strong winds, or snow. Always retract the awning under such conditions to avoid damage.
This guide serves as a comprehensive reference for customer service and technical staff when addressing queries related to the Fiamma Awning installation, usage, and maintenance.