Nothing in cart
Review of Caravans Plus Service
Arrived on time when promised fast quick and reliable good job guys
1st order by Chris from NSW
Canopy Lifter - 30Kg - 900 Wide - 685 Lift
$195
Short delay, none in stock.
Order now for estimated dispatch on 4th Jun 2025.
Pay in 4 payments of $48.75. Learn more.
Postage & ETA
Enter your postcode for delivery cost.
Stock Update - 20th May 2025
Sorry, this item is not in our warehouse.The demand for this product is normally very low so we only get these in as needed.
If you place an order, we will get it with our weekly supplier delivery.
Description
Canopy Lifters are used to raise and support the roof of pop-top caravans and campers. This unit has a softer spring with a maximum lift rating of 30kg per unit. These spring loaded scissor type roof lifters are made of solid flat steel.Features
- Each lifter will hold up 30kg of roof, with the soft spring included.
The bottom bracket measures 900mm long, and it can lift to a maximum height of 685mm.
When replacing, it is best to replace opposite lifters at the same time, to prevent undue stress which will bend the arms. These are stronger than the tubular arms.
CARE - when fitting, insure they are replaced in the same direction as they were i.e. if the fixed corner is on the right, replace it with the fixed corner on the right. This will vary for each side.
The enlargement shows the bracket closed. The vertical height when closed is 70mm and the width is 45mm. The image shows the mounting holes in the vertical face, and there are also holes in the horizontal faces for alternate mounting.
We do NOT recommend replacing the scissor style with the gas struts and alternate ends as it can take quite a lot of experimenting in position, which involves new holes being drilled each time as the opposing forces must be balanced to have correct location when up as well as when down.
Price is for one unit.
- 1 year warranty.
Specifications
- Model: 008344
- Brand: Breha
- 900mm wide, up to 685mm high.
- Capacity 30kg.
- Closed x-section is 71mm high, 42mm thick
- Units: 1 x Canopy Lifter
- Shipping Weight: 3.61 Kgs.
- Shipping Dimensions: 90 cm x 7 cm x 2 cm.
Our Comments
We have two different types of 900 wide canopy lifters and the mount holes are in slightly different places.The Tubular lifter measure 927mm in length when closed with mount holes centres 900mm apart.
The Breha have flat bars and measure 900mm in length with mount holes centres 860mm apart.
This is the GENUINE original replacement spare part. Beware of aftermarket parts for this product.
Community Photos
