BMPRO TrailSafeBT & Optional TrailCheck - Technical and Customer Service Guide

Introduction

BMPRO, a division of Setec, is a leader in RV power management solutions with over 50 years of experience. The TrailSafeBT, along with the optional TrailCheck, is designed to ensure safety and reliability for trailers, particularly in emergency breakaway situations. This guide serves as a comprehensive resource for customer service and technical staff to assist users of the TrailSafeBT system.

Safety Precautions

• Installation and Trial: After installation, conduct a trial operation to check for faults. NSW legislation mandates an additional remote trailer battery monitor system.
• Handling Batteries: Exercise caution around batteries to prevent short circuits and personal injury. Disconnect power before servicing and ensure batteries are fully charged for optimal performance.
• Product Handling: The TrailSafeBT is a high-precision electronic product with no user-serviceable parts. Unauthorized disassembly or modification voids the warranty.

About TrailSafeBT

• Compliance: Meets Australian Design Rule 38/02 and NSW RTA VSI-22 for trailers over 2,000 kg, requiring an emergency braking system and a monitoring system for the trailer battery's condition.
• Functionality: Activates the electric brakes and brake lights of a trailer in case of disconnection from the towing vehicle. It uses the trailer's house battery and provides status indicators for battery charge and system functionality.

Key Features

• Emergency Braking Activation: Automatically activates trailer brakes upon disconnection from the tow vehicle.
• Battery Utilization: Uses the trailer's house battery, eliminating the need for a separate battery.
• Indicator Light: Allows for easy testing of the battery and pull switch.
• Remote Monitoring: Supports both wired and wireless monitoring of the system's status.

Installation Instructions

Mounting

• Location: Mount on the right-hand side drawbar of the trailer, approximately 300mm from the tow ball hitch, ensuring the unit can swivel in an emergency.
• Orientation: Wires and mounting bolt should point towards the rear, with the pull pin facing towards the tow vehicle.

Wiring

Connections: Detailed wiring instructions are provided, including connections for brake lights, brakes, remote line, and house battery. A suitably qualified Auto Electrician should perform wiring to ensure safety and compliance.

Initial Self Test

Procedure: Conduct an initial self-test by inserting the pull pin and observing the status indicator. This test checks the pull pin contacts, battery, wiring, and brakes.

TrailCheck Monitor Installation

• Visibility: Install where visible to the driver, ensuring reliable connection or opting for a wired remote if necessary.
• Mounting: Use provided Velcro strips for mounting, ensuring the surface is clean for optimal adhesion.

Pairing TrailSafeBT and TrailCheck

Steps: Detailed steps are provided for pairing the devices, including troubleshooting tips for ensuring a successful connection.

Servicing and Specifications

• Servicing: Do not attempt to service or dismantle the product yourself. Contact BMPRO for servicing needs.
• Specifications: Includes system voltage, electric brake load, brake light load, and communication protocol details.

FAQs and Troubleshooting

Common Issues: Addresses issues such as non-illuminating indicators, testing procedures, and status indication meanings. Provides solutions for common problems encountered by users.

Warranty Terms and Conditions

• Warranty Registration: Encourages registering the product online for warranty benefits.
• Coverage: Outlines the warranty period, exclusions, and the process for making a claim.

This guide is intended to provide all necessary information for customer service and technical staff to support users of the TrailSafeBT and optional TrailCheck system. For further assistance, refer to the BMPRO technical support team.