9 February: Over 90% of orders sent within 2 business hours. Posting Australia wide.
CaravansPlus Accessories Shop
Cart
CaravansPlus.com.au

BMPRO Dipper 2.5M - Water Tank Sensor

BMPRO Dripper - Water Tank Sensor
BMPRO Dripper - Water Tank Sensor
BMPRO Dipper Water Tank Sensor Connections
BMPRO Dipper Water Tank Sensor Connections
Step 1: Drill 22mm Hole
Step 1: Drill 22mm Hole
Step 2: Insert Sender Unit Through Hole
Step 2: Insert Sender Unit Through Hole
Step 3: Tighten Nut To Engage Self Sealing Grommet
Step 3: Tighten Nut To Engage Self Sealing Grommet
$73.95
7 In Stock Now.
Postage & ETA
Enter your postcode for delivery cost.
Postage: $11.40 (Combine & Save)
1 Review

Stock Update - 9th February 2025

Yes, we have stock. Right now there are 7 of these held at our warehouse (Queanbeyan NSW).
Our stock levels are real and live. If you order now we will get it out with our next daily freight.
If you order more than we have in stock the delay will be approx 1 week.
We aim to hold the most stock and have the fastest delivery on all caravan accessories and spare parts.

Description

Easy to install tank sender used to measure water level in your Caravan or RV water tank.

Installation Instruction

1. Empty the water from the tank(s)
2. Choose a suitable side of the tank where the level-sensing can be located.
3. Drill the required hole in the tank
4. Install the tank sensor to the tank
5. Connect sensor connector to the water tank loom
6. Fill the tank(s) and check for water leaks around the bungs. Reseal as necessary.
7. Test operation of water level sensors.

Features

  • Easy Installation
  • Fits existing water tanks
  • Compatible with BMPRO Trek and Drifter units for tank reading display
  • Suitable for use in caravans, boats, motor homes and camper trailers
  • Suitable for plastic and metal water tanks
  • 1 year warranty.

Specifications

    • Model: DIPPER2.5, 500-00723
    • Brand: BMPRO
    • Barcode: 799439885530
    • Ring Terminal: Stainless Steel 316 corrosive resistant properties
    • 5 Pin Connecter: Eliminates need to rewire if retrofitting
    • Mounting Hole required: 22mm
    • Cable Length: 2.5M
    • The straight part of the dipper is roughly 200mm
    • Shipping Weight: 260 grams.
    • Shipping Dimensions: 18 cm x 29 cm x 6 cm.

Further Information

Video Guide

BMPRO - RV Battery Management Specialists

BMPRO - RV Battery Management Specialists

Information Articles, FAQ & Guides by the CaravansPlus Team...
Read

Verified Community Reviews (1)