Enerdrive Battery Charger Technical and Operational Guide

Introduction:

Thank you for choosing the Enerdrive Battery Charger. This guide provides comprehensive instructions and safety information for the optimal use of your battery charger, designed for various applications including home, marine, and vehicle installations.

Product Description:

The Enerdrive Battery Charger is available in several models with different voltage and amperage configurations:

• EN31220: 12V / 20Amp
• EN31240: 12V / 40Amp
• EN31260: 12V / 60Amp
• EN312100: 12V / 100Amp
• EN32430: 24V / 30Amp

Each package includes:

• Battery Charger
• Battery Temperature Sensor (7.5 Meter Cable)
• IEC 240Vac Power Lead
• Owner’s Manual

Safety Information:

• Read all instructions and cautionary markings before use.
• Do not obstruct air vents or install in zero-clearance compartments.
• Avoid exposure to moisture and ensure the unit is kept away from children.
• Use protective gear when handling batteries.
• Ensure proper ventilation to avoid flammable fumes.
• Do not use the charger for life support systems or medical devices.

Installation Instructions:

1. Mounting the Charger:

• Select an appropriate indoor location, avoiding direct sunlight and moisture.
• Allow at least 75mm of space around the unit for ventilation.
• Use the base of the charger as a template to mark and drill fixing holes.

2. Wiring Connections:

• Ensure correct DC wiring size and install over-current protection within 20cm of each battery bank.
• Recommended cable sizes vary by model and are specified in the manual.
• Connect the positive and negative wires to the respective terminals and ensure secure connections without overtightening.

3. Battery Temperature Sensor Installation:

• Connect the RJ12 plug from the sensor to the charger’s temperature sensor port.
• Attach the sensor’s ring terminals to the negative terminal of the main battery bank.

4. Optional Remote Display Connection:

• Use a standard RJ12 cable to connect the remote display to the interface port on the charger.

Operating Instructions:

1. Charging Process:

• The charger is capable of charging up to three separate battery banks.
• It features a multistage charging process including Bulk, Absorption, Float, and Maintenance stages.
• Specific settings for GEL, AGM, Flooded, and Lithium batteries are available.

2. Using the Charger as a Power Supply:

• When set to Program mode, the charger acts as a constant voltage power supply. Note that only Bank 1 can be used in this mode.

3. Understanding Display and Function Keys:

• The display shows battery voltage, charging current, and stage. Use the ‘MENU’, ‘SET’, and ‘SEL’ keys to navigate and set different functions.

Troubleshooting:

Refer to the manual for a detailed explanation of error codes and troubleshooting steps.

Specifications:

Voltage and current settings are detailed for each model and battery type in the manual.

Maintenance and Care:

Regularly check connections and ensure the charger is clean and free from obstructions.

Follow the manual’s guidelines for periodic maintenance and settings review.

Warranty:

The Enerdrive Battery Charger comes with a 5-year warranty, covering defects in material and workmanship under normal use.

For further assistance or more detailed information, refer to the specific sections of the owner’s manual or visit the Enerdrive website.