TYRERAPID FLOW INFLATOR - Customer Service and Technical Staff Reference Guide

Product Overview

The TYRERAPID Flow Inflator is a compact, portable air compressor designed for inflating tires. It is equipped with an LCD display, a smart encode button for setting desired pressure, and an automatic shut-off feature when the set pressure is reached.

Control Layout

• A. Compressor ON/OFF Button: Powers the compressor on or off.
• B. Encode Button: Used to select and set the desired pressure unit (PSI, KPA, BAR) and level.
• C. Light ON/OFF Button: Controls the Multi Function LED light.
• D. LCD Display: Shows the current pressure and settings.
• E. Air Hose: Connects the compressor to the tire valve stem.
• F. Adaptor: For use with various inflatables.
• G. 12V Power Plug: Plugs into the vehicle's power socket.
• H. Multi Function LED Light: Provides illumination in low-light conditions.

Technical Specifications

• Voltage: DC12V
• Max Current: <18A
• Inflate Time: 2.5min (Based on inflating a standard tire 195/65R15 to 35 PSI)
• Max Pressure: 100PSI
• Cable Length: 3000+100mm
• Hose Length: 800+50mm
• Operation Temperature: -20~60°C
• Dimensions: 250*100*150mm
• Net Weight: 2.5KGS

Inflation Instructions

1. Plug the 12V power plug into the vehicle's power socket.
2. Screw the air hose onto the tire valve stem.
3. Press the smart encode button to select your desired pressure unit (PSI, KPA, BAR).
   • Hold the encode button for more than 2 seconds until the LCD display flashes.
   • Rotate the button to set the desired pressure level.
4. Press the compressor "ON/OFF" button to start inflation.
5. The inflator will automatically stop once the set pressure is reached.

Safety Precautions

• For use with 12 Volt power supply only.
• Only use the supplied inflating adaptors.
• Not designed for high pressure tires such as truck tires.
• Do not leave unattended while running.
• Avoid overinflating tires.
• Ensure the inflator is in the "OFF" position before connecting.
• Keep out of reach of children and away from moisture.

Troubleshooting

• Inflator Does Not Start:
  1. Ensure car ignition is on.
  2. Check the 12V plug connection in the power socket.
  3. Verify vehicle power outlet fuse is 15 amps or higher.
• Inflator Runs But Does Not Inflate:
  1. Ensure a tight connection on the valve stem.
  2. Inspect tire and hose for leaks.
• Inflator Runs Slow:
  1. If overheated, turn off and cool for 25 minutes.
  2. Check for low car battery voltage.

This guide serves as a comprehensive reference for customer service and technical staff when addressing inquiries or issues related to the TYRERAPID Flow Inflator.