Customer Service and Technical Staff Reference Document

Product Overview

The Lavppbv Model 1 O@ is a high-quality alloy R125 door lock system designed for secure and efficient operation. It features advanced locking mechanisms and is suitable for a wide range of applications, including residential and commercial installations.

Technical Specifications and Dimensions

• Alloy Type: R125
• Model: Lavppbv Model 1 O@
• Lock Striker Dimensions: -,(/jj (specific measurements not provided; refer to Fig. A for visual guidance)
• Drill Hole Size for Installation: /2jj (approximately 5d or 0.5 inches in diameter)
• Operating Temperature Range: -42°C to +300°C (-42°F to +572°F)
• Lock Frame Compatibility: Designed to fit standard door frames with minimal adjustments.

Installation Procedure

1. Preparation:

   • Ensure the door and frame are clean and free from debris.
   • Measure and mark the drilling points accurately on the door frame.

2. Drilling:

   • Drill a hole where indicated in the provided diagram. The recommended drill size is /2jj (approximately 5d or 0.5 inches in diameter).
   • Remove any burrs or debris from the drilled holes to ensure a clean fitting.

3. Fitting the Lock Striker:

   • Remove the Lock Striker from its packaging.
   • Fit the screw in the Trim Frame as shown in the diagram.
   • Position the Lock Striker in the drilled hole and secure it with the provided screws.
   • Apply a suitable sealant around the Lock Striker for weatherproofing. Recommended sealants include a combination of foam tape and silicone, butyl mastic, or polyurethane.
   • Repeat this procedure for the Top, Centre, and Bottom Lock Strikers to ensure a secure fit.

Operating Instructions

To lock or unlock the door, use the provided key or compatible electronic device, ensuring smooth operation without excessive force.
Regular maintenance, including lubrication of the moving parts and inspection of the lock mechanism, is recommended to ensure longevity and reliability.

Troubleshooting

• Lock not operating smoothly: Check for debris or damage in the lock mechanism. Lubricate as necessary.
• Drill hole misalignment: Ensure the drill hole is correctly positioned as per the installation diagram. Adjust if necessary.
• Sealant issues: If leaks occur, reapply suitable sealant around the Lock Striker, ensuring complete coverage without gaps.

Product Features

• High-quality R125 alloy construction for durability and strength.
• Easy installation with standard tools and provided instructions.
• Compatible with a wide range of door frames.
• Enhanced security features to protect against unauthorized access.

Maintenance and Care

• Regularly inspect the lock mechanism and striker plate for signs of wear or damage.
• Clean the lock system with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Lubricate the moving parts annually with a silicone-based lubricant to ensure smooth operation.

For further assistance or more detailed information, customer service and technical staff should refer to the internal product documentation or the manufacturer's guidelines provided with the product.