PDF Product Manual 9
Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.
FIAMMA Carry-Bike 200 D User Guide for Customer Service and Technical Staff
Product Overview
The FIAMMA Carry-Bike 200 D is a bicycle carrier designed for easy installation and use on various vehicles. It is safety tested and capable of carrying up to two bicycles with a maximum load capacity of 35 kg. The carrier itself weighs 6.9 kg and has dimensions of 60 cm in width, 48 cm in height, with an adjustable depth of 90-118 cm and a length of 128 cm.
Package Contents
- 2 x D brackets
- 4 x A brackets
- 4 x O brackets
- 4 x H brackets
- 4 x N brackets
- 4 x C brackets
- 4 x F brackets
- 2 x M brackets
- 2 x L brackets
- 2 x I brackets
- 4 x E brackets
- 8 x Q screws
- 4 x R screws
- 4 x P screws
- 2 x V screws
- 2 x S screws
- 2 x T screws
- 4 x U screws
- 4 x W screws
- 2 x Y screws
- 2 x K screws
- 20 x X screws
- 10 x Z screws
- Various M6 and M5 screws of different lengths
Installation Instructions
Initial Check: Upon receiving the Carry-Bike, inspect all parts for any damage or deformation that may have occurred during transport. If any issues are found or if there are doubts regarding the installation, use, or limitations of the product, contact the dealer. Installation is recommended to be carried out by qualified personnel in compliance with local regulations.
Mounting: Follow the detailed steps provided in the manual, starting with attaching brackets D, A, C, and B to the vehicle. Ensure not to fully tighten the fork to the tube, leaving a 2 mm space for adjustments.
Adjusting for Vehicle: The carrier can be adjusted in width from 60 cm to 128 cm to fit the vehicle's rear axle. Ensure that the wall/rear door is solid enough to support the anchoring points. If not, reinforcement may be necessary.
Weight Distribution: After installation, check the vehicle's weight distribution to ensure it does not exceed the maximum permissible axle load. Correct weight distribution is crucial for stability; the heaviest bike should be placed nearest to the vehicle wall.
Safety Precautions: Always signal the presence of the Carry-Bike on your vehicle, especially if rear visibility is limited. Be mindful of the carrier during driving and reversing. Periodically check the rack to ensure it is securely attached.
Safety Instructions
- Never exceed the maximum load capacity of 35 kg.
- Ensure compatibility with the vehicle before installation.
- Load bicycles for even weight distribution.
- Use additional rear-view mirrors if the carrier obstructs the vehicle's rear view.
- Verify that there is enough distance between the bicycles and the vehicle to prevent damage.
Accessories
- Rail Premium S (Item No. 98656-656)
- Plastic Signal (Item No. 98782-005)
- Cable-Lock (Item No. 98656-338)
- Bike-Block Pro S (Item No. 98782-010)
- Alu Signal (Item No. 06146-01-)
- Bike-Block Pro S D (Item No. 06602-01-)
- Bike Frame Adapter
Warranty
FIAMMA offers a warranty for defects related to materials and manufacturing, subject to local laws and regulations of the country where the product was purchased. For warranty claims, contact your local dealer with the data provided on the nameplate and consult the FIAMMA website for spare parts and further information.
Troubleshooting and Contact Information
In case of problems, ensure to have the serial number (S/N) and model information (CARRY-BIKEĀ® S/N: N 2000001) ready when contacting your local dealer. For spare parts and detailed diagrams, refer to the FIAMMA website.
Note: FIAMMA S.p.A. reserves the right to modify specifications, models, or discontinue any model without notice. Always refer to the latest documentation for up-to-date information.